Confronted with problems associated with removing cocoa beans, methods, technologies and equipment have been developed and applied over the years. This paper comprehensively reviews the most effective method and technology to split cocoa pods and remove the beans. The working principle of the technique was explained with the cocoa pod opening mechanism, structures applicability and cost of the working method. The forces involved in opening cocoa pods are shearing, compressive, and impact depending on the machine type and the process used. The techniques applied in opening cocoa pods are grouped into traditional (manual) and improved (mechanised). The manual method of opening the cocoa pod is time-consuming and prone to accidents leading to injury to beans and farmers. The strength of the labour force available during harvest also affects the manual method. When cocoa beans are damaged, they deteriorate and are not appropriate for fermentation. The mechanised splitting has a high initial investment but very fast and reduced losses. Information gathered on cocoa pod mechanization shows that despite the countless efforts in developing various opening mechanisms. a high bean damage ratio and separation problems are still yet to be controlled. The current trends and techniques in cocoa pod opening mechanisms are also presented.
Published in | American Journal of Agriculture and Forestry (Volume 12, Issue 3) |
DOI | 10.11648/j.ajaf.20241203.15 |
Page(s) | 185-194 |
Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
Copyright |
Copyright © The Author(s), 2024. Published by Science Publishing Group |
Cocoa Pods, Opening Mechanism, Machine Design, Cocoa
[1] | de Souza, P. A., et al., Cacao—Theobroma cacao, in Exotic fruits. 2018, Elsevier. p. 69-76. |
[2] | De, L., Edible seeds and nuts in the human diet for immunity development. Int. J. Recent Sci. Res, 2020. 6(11): p. 38877-38881. |
[3] | Reed, C. A., Origins of Agriculture: Discussion and Some Conclusions. World Anthropology, 1977: p. 879. |
[4] | Abdulai, I., et al., Cocoa agroforestry is less resilient to sub-optimal and extreme climate than cocoa in full sun. Global change biology, 2018. 24(1): p. 273-286. |
[5] | Afoakwa, E. O., Cocoa production and processing technology. 2014: CRC Press. |
[6] | Wessel, M. and P. F. Quist-Wessel, Cocoa production in West Africa, a review and analysis of recent developments. NJAS: Wageningen Journal of Life Sciences, 2015. 74(1): p. 1-7. |
[7] | Pratt, A. N. and B. Yu, An updated look at the recovery of agricultural productivity in Sub-Saharan Africa. 2008: Intl Food Policy Res Inst. |
[8] | Ghana, G. C. B. C., Cocoa Research Institute of Ghana (CRIG). Cocoa Research Institute of Ghana (CRIG). 2014. |
[9] | Kalischek, N., et al., Satellite-based high-resolution maps of cocoa planted area for C\^ ote d'Ivoire and Ghana. arXiv preprint arXiv: 2206.06119, 2022. |
[10] | Choudary, R., et al. A pedal operated cocoa POD breaker. in AIP Conference Proceedings. 2019. AIP Publishing LLC. |
[11] | Oracz, J., D. Zyzelewicz, and E. Nebesny, The content of polyphenolic compounds in cocoa beans (Theobroma cacao L.), depending on variety, growing region, and processing operations: A review. Critical reviews in food science and nutrition, 2015. 55(9): p. 1176-1192. |
[12] | Joshy, A., et al., Development and Performance Evaluation of a Cocoa pod breaker cum bean extractor. 2015, Department of Post-Harvest Technology and Agricultural Processing. |
[13] | Ciferri, R., Early'Criollo'Cacao in Surinam and the Origin of'Forasteros' of Trinidad and Venezuela. Nature, 1949. 163(4155): p. 953-953. |
[14] | Danso-Abbeam, G., E. D. Setsoafia, and I. G. K. Ansah, Modelling farmers investment in agrochemicals: the experience of smallholder cocoa farmers in Ghana. 2014. |
[15] | Nyavowoyi, M. A., Why Institutions The Case of Ghana's Cocoa Sector. 2019. |
[16] | Van Huellen, S. and F. M. Abubakar, Potential for upgrading in financialised agri-food chains: the Case of Ghanaian Cocoa. The European journal of development research, 2021. 33: p. 227-252. |
[17] | Edoh Adabe, K. and L. Ngo-Samnick, Cocoa: Production and processing. 2014: CTA. |
[18] | Mathanker, S. K. and A. C. Hansen, Harvesting system design and performance. Engineering and science of biomass feedstock production and provision, 2014: p.85-139. |
[19] | Adewale, B., O. Adeigbe, and A. Muyiwa, Cocoa Seed Garden: a means to disseminating improved planting materials for enhanced national productivity: A review. Agricultural Reviews, 2016. 37(3): p. 205-212. |
[20] | Maduako, J. and M. Faborode, Characterization of the breaking behaviour of whole cocoa pods. Journal of Agricultural Engineering Research, 1994. 59(2): p. 89-96. |
[21] | Amoa-Awua, W. K., Methods of cocoa fermentation and drying. RF Schwan and GH Fleet, Cocoa and Coffee Fermentations, First ed., CRC Press-Taylor & Francis Group, NY, USA. Pag, 2015: p. 71-116. |
[22] | Fowler, M. S. and F. Coutel, Cocoa beans: from tree to factory. Beckett's Industrial Chocolate Manufacture and Use, 2017: p. 9-49. |
[23] | Nag, P. and L. Gite, Human-Centered Agriculture: Ergonomics and Human Factors Applied. 2020: Springer Nature. |
[24] | Bello, S., et al., Design, Fabrication and Testing of a Cocoa Depodding Machine. 2021. |
[25] | Adewumi, B. and A. Fatusin, Design, fabrication and testing of an impact-type hand operated cocoa pod breaker. Agricultural Engineering International: CIGR Journal, 2006. |
[26] | Caleb, O. and B. Akinnuli, Development of Electrically Powered Reciprocating Cocoa Pods Breaking Machine. Development, 2019. 2(1). |
[27] | Josué, D. F., et al., Design and development of cocoa pod breaking and beans extraction machine. International Journal of Engineering and Technology, 2019. 8(3): p. 357-366. |
[28] | Adzimah, S. and E. Asiam, Design of a cocoa pod splitting machine. Research Journal of Applied Sciences, Engineering and Technology, 2010. 2(7): p. 622-634. |
[29] | Mbusa, E. L., Design and fabrication of a motorized cocoa pod splitting and separating machine. 2020, Busitema University. |
[30] | Escobar, S., et al., Aligning strategic objectives with research and development activities in a soft commodity sector: a technological plan for colombian cocoa producers. Agriculture, 2020.10(5): p.141. |
[31] | Boateng, D. O., et al., Impact of storage practices and pest on the quality of cocoa beans in warehouses in Brofoyedru Cocoa District of Ghana. 2022. |
[32] | Obeng-Ofori, D., P. Opare, and J. Agyei-Ohemeng, Inventory of existing and exploitable knowledge and technologies on cocoa and maize production in Ghana. Centre for Innovation and Technology Dissemination (CITED), University of Energy and Natural Resources (UENR), Sunyani Ghana, 2014. |
[33] | Saravacos, G., et al., Mechanical processing equipment. Handbook of food processing equipment, 2016: p. 149-232. |
[34] | Palakkeel, A., et al., Development and Performance Evaluation of a Cocoa Bean Sheller cum Winnower. 2020, Department of processing and Food Engineering. |
[35] | Vankayalapati, S. and G. Rajesh, Development and evaluation of a continuous cocoa pod breaker. 2016, Department of Post-Harvest Technology and Agricultural Processing. |
[36] | Srikanth, V., et al., Modeling and optimization of developed cocoa beans extractor parameters using box behnken design and artificial neural network. Computers and Electronics in Agriculture, 2020. 177: p. 105715. |
[37] | Amoshie, D. A. and H. R. Beem. Design, Construction and Testing of a Cocoa Pod Breaking Machine to Improve Cocoa Processing. in 2022 IST-Africa Conference (IST-Africa). 2022. IEEE. |
[38] | Sahin, S. and S. G. Sumnu, Physical properties of foods. 2006: Springer Science & Business Media. |
[39] | Aliu, S. and P. Ebunilo. Development and performance evaluation of a cocoa pod-breaking machine. in Advanced Materials Research. 2012. Trans Tech Publ. |
[40] | Iyanda, M., Design, fabrication and testing of cocoa depodding machine. 2018. |
[41] | Owolarafe, O., et al., Application of coefficient of friction to the separation of cocoa husk–beans mixture. Journal of food process engineering, 2007. 30(5): p. 584-592. |
[42] | Bamgboye, A. I., Effect of some physical properties of cocoa beans and post-harvest delay on its compressive and impact rupture load. Discovery and Innovation, 2003. 15(3-4): p. 137-142. |
APA Style
Randy, A., Asante, E. A., Bobobee, E. H. Y., Amano, G. K. (2024). Mechanised Removal of Cocoa Beans from the Pod and Strategies to Optimize the Technique: A Review. American Journal of Agriculture and Forestry, 12(3), 185-194. https://doi.org/10.11648/j.ajaf.20241203.15
ACS Style
Randy, A.; Asante, E. A.; Bobobee, E. H. Y.; Amano, G. K. Mechanised Removal of Cocoa Beans from the Pod and Strategies to Optimize the Technique: A Review. Am. J. Agric. For. 2024, 12(3), 185-194. doi: 10.11648/j.ajaf.20241203.15
AMA Style
Randy A, Asante EA, Bobobee EHY, Amano GK. Mechanised Removal of Cocoa Beans from the Pod and Strategies to Optimize the Technique: A Review. Am J Agric For. 2024;12(3):185-194. doi: 10.11648/j.ajaf.20241203.15
@article{10.11648/j.ajaf.20241203.15, author = {Amuaku Randy and Eric Amoah Asante and E. H. Y. Bobobee and Godwin Kwasi Amano}, title = {Mechanised Removal of Cocoa Beans from the Pod and Strategies to Optimize the Technique: A Review }, journal = {American Journal of Agriculture and Forestry}, volume = {12}, number = {3}, pages = {185-194}, doi = {10.11648/j.ajaf.20241203.15}, url = {https://doi.org/10.11648/j.ajaf.20241203.15}, eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajaf.20241203.15}, abstract = {Confronted with problems associated with removing cocoa beans, methods, technologies and equipment have been developed and applied over the years. This paper comprehensively reviews the most effective method and technology to split cocoa pods and remove the beans. The working principle of the technique was explained with the cocoa pod opening mechanism, structures applicability and cost of the working method. The forces involved in opening cocoa pods are shearing, compressive, and impact depending on the machine type and the process used. The techniques applied in opening cocoa pods are grouped into traditional (manual) and improved (mechanised). The manual method of opening the cocoa pod is time-consuming and prone to accidents leading to injury to beans and farmers. The strength of the labour force available during harvest also affects the manual method. When cocoa beans are damaged, they deteriorate and are not appropriate for fermentation. The mechanised splitting has a high initial investment but very fast and reduced losses. Information gathered on cocoa pod mechanization shows that despite the countless efforts in developing various opening mechanisms. a high bean damage ratio and separation problems are still yet to be controlled. The current trends and techniques in cocoa pod opening mechanisms are also presented. }, year = {2024} }
TY - JOUR T1 - Mechanised Removal of Cocoa Beans from the Pod and Strategies to Optimize the Technique: A Review AU - Amuaku Randy AU - Eric Amoah Asante AU - E. H. Y. Bobobee AU - Godwin Kwasi Amano Y1 - 2024/06/03 PY - 2024 N1 - https://doi.org/10.11648/j.ajaf.20241203.15 DO - 10.11648/j.ajaf.20241203.15 T2 - American Journal of Agriculture and Forestry JF - American Journal of Agriculture and Forestry JO - American Journal of Agriculture and Forestry SP - 185 EP - 194 PB - Science Publishing Group SN - 2330-8591 UR - https://doi.org/10.11648/j.ajaf.20241203.15 AB - Confronted with problems associated with removing cocoa beans, methods, technologies and equipment have been developed and applied over the years. This paper comprehensively reviews the most effective method and technology to split cocoa pods and remove the beans. The working principle of the technique was explained with the cocoa pod opening mechanism, structures applicability and cost of the working method. The forces involved in opening cocoa pods are shearing, compressive, and impact depending on the machine type and the process used. The techniques applied in opening cocoa pods are grouped into traditional (manual) and improved (mechanised). The manual method of opening the cocoa pod is time-consuming and prone to accidents leading to injury to beans and farmers. The strength of the labour force available during harvest also affects the manual method. When cocoa beans are damaged, they deteriorate and are not appropriate for fermentation. The mechanised splitting has a high initial investment but very fast and reduced losses. Information gathered on cocoa pod mechanization shows that despite the countless efforts in developing various opening mechanisms. a high bean damage ratio and separation problems are still yet to be controlled. The current trends and techniques in cocoa pod opening mechanisms are also presented. VL - 12 IS - 3 ER -